To obtain optimum performance from transformer,
it requires high quality and purity of insulating
oilduring the time of use for all present and
future transformer. The increasing voltage and
rating of the modern transformer under goes greater
electrical stress in insulating material and fluids
of electrical apparatus. To avoid these stresses,
oil with good dielectric qualities and minimum
residual moisture (water) content in oil should
be maintained.
A contaminated oil tends to lose its characteristics
of dielectric strength, resistivity and loss factor.
Moisture in oil, favours acid and sludge formation.
The CEE DEE insulating oil treatment equipment
has been designed specifically for the filtration,
dehydration and degassing of the insulating oils
used with transformers, electric cables, switch
gears etc.
UNIQUE FEATURES
Capacity ranges from 50 LPH to 24000 LPH.
Easy-to-clean inlet mesh filter used to catch
hold coarse dirt.
Standard efficiency of 0.5 / 1 Micron cartridge
filter.
Heat exchange through very low specific power
electric heaters.
Degassing column with either single, two or three
stage version.
Vacuum pumpset in combination with Rotary vane
vacuum pump and Roots pump to improve the vacuum
pumping Speed.
Compact, easy to operate equipment supplied with
pneumatic wheels for an easy transport on road.
OPTION
Condenser equip to settle the most volatile oil
fractions which might distil back to the column.
An exhaust condenser
to measure the extracted water.
Digital temperature
measurement.
Digital precision
vacuum gauge.
Digital flowmeter.
Digital in line moisture
& gas content meter.
Ionic reaction columns
to remove the acidity from the oil.
